I had 2 computers, 2 ipads and 2 iphones that all connected fine but my xbox 360 and apple tv could not obtain an ip address until i used the above method.

Finally, Login to your router (in my case that was a Netgear WNDR3700 v1 with the latest firmware) and manually assign an ip address for the WN3000RP (in my case Lan Setup > Address Reservations > Add)Īfter this, all of your devices should connect properly using automatic settings.

An easy way to make sure you have the correct numbers above, in osx go to network > advanced > TCP/IP and compare, the last 3 digits of the IP Address for Extender (above i set it to 250) needs to be a unique number, different than your macbook).

Gateway IP Address: 192.168.1.1 - this is your router's ip address on the network.

the numbers below are my settings, but should work well for netgear routers.

Click IP Address Setup and change it to use Static IP Address.

Log into your WN3000RP via (accessible only on your network) from a locally connected computer on your extender.

Then to view the camera you would use your No-IP host of “” like this: to reach the webcam.I had the same issue but managed to fix by doing the follwing: You would enter the below values into port forwarding page. You want to be able to access this camera from outside your network on port 8080. You have a webcam that has the IP address 192.168.1.100 and it runs on port 8080. If you are still not able to see the ports check the firewall and anti-virus software on your computer. You can call and ask if they are being blocked. Xiaomi Mi WiFi Repeater Pro Extender 300Mbps Wireless Network Wireless Signal Enhancement Network Wireless Router. Netgear Universal Wifi Range Extender WN3000RP, White (Refurbished) 3+ day shipping. Once you save the settings you should now be able to test your port at Please keep in mind your ISP (Internet Service Provider) can be blocking certain ports such as port 80, 25 and 21. Netgear Universal Wifi Range Extender WN3000RP, White (Refurbished) 45.89. After you have entered all the desired information click “Apply”. Server IP Address will be the IP Address that you would like to open the ports on. Starting Port is the port you would like to open, Ending port is the port you would like to stop at. Service Type you should leave set to TCP/UDP. Step 4: Choose a name for the service (small description eg. Click “Port Forwarding / Port Triggering” then click “Add Custom Service”. Step 3: Go to “Advanced” and below “Advanced” you will see “Port Forwarding / Port Triggering”.

Default password: password (For old netgear routers you might want to try 1234.).

Step 2: Login to the router (common default values listed below). Step 1: Open up your favorite browser and go to the router’s default gateway address. This guide will walk you through the steps of port forwarding on the Netgear WGR614 v6 Router.

Ip address for netgear router extender